NozzlePro™

These modules were designed to add increased ease-of-use & design for the most common analysis needs. All of these modules use the FEA engine from FEPipe to perform the high-level calculations and reporting. All of the following modules are included with NozzlePRO v12.1 as specialized templates.

• MATpRO
• Fitness for Service

These modules were also designed to add increased ease-of-use & design for the most common analysis needs. Some of the STANDARD templates were converted to more simplified analysis tools. These modules are included with an active NozzlePRO v12.1 service plan.

• FE107
• FESIF
• FETee

•  Element library (beam, shell, axisymmetric, & brick)
• Linear elastic analysis
• Material non-linear analysis (plasticity) (elastic-plastic analysis per ASME Section VIII-2 Part 5)
• Steady state and transient thermal analysis (for lugs & shoes)
• 2007 Edition of ASME Section VIII-2 (and post 2007, i.e. 2010, 2013, 2015, 2017)

•  Weight, Operating, Occasional, Thermal and Pressure
• Internal or external pressure
• Applied point or surface loadings
• Piping loads applied to nozzles
• Acceleration due to ship motion or transportation
• Seismic

•  MultiCore SuperNode Solver (64-bit solution that runs 2-4 times faster)
• Automatic Generation of B31.3 SSIs or B31.1 replacement for .75i per B31J
• Directives for EN13445 Local Stress Analysis
• Reinhart Elastic-Plastic Ratcheting
• Twice Yield Fatigue Evaluation
• Fitness for Service (API-579/FFS-1 Level 1-3 local thinning capability)